Currently most single and apartment buildings are using many boilers. Besides standard boilers which are heated by oil or gas, there are some boilers that utilize solid fuels such as wood, pellets or biomass.
Oil-heaters are losing in attractiveness because of increasing raw material prices and bad impact on the environment. They take most of their needed combustion air from boiler rooms. These rooms therefore need sufficient opening to the outside to take in fresh air. Modern condensating boilers can work independent of room air.
Low temperature boilers save a large amount of energy and in turn prevent unnecessary emissions contrary to older boilers. In contrast to older boilers the exhaust gas temperature is far below 200ºC. Modernization of heating system therefore requires adapting your chimney to these temperatures. A reduction of the cross section is made through the construction of a exhaust pipe in the existing chimney. This prevents the accumulation too much soot in the chimney.
For such applications we offer different systems single or double walled made of corossion resistant stainless steel.
Economical modular metallic single wall chimney for gas and smoke exhaust of combustion products
The classic one for relining: single wall stainless steel chimney for modernizing and reducing the cross-sectional area of existing chimneys, connection pipes and for the ventilation.
Single wall acid resistant stainless steel chimney for reduced cross-sectional area of chimneys for the adaptation to modern fireplaces (oil/gas/chip/split logs and wood pellets according to DIN 51731, for dry and moist mode of operation.
Stainless steel connection pipe in high gloss for all standard fireplaces with low pressure and for dry and moist mode of operation.
Single wall flexible stainless steel exhaust system for relining of chimneys with offset.
Single wall flue system with conical connection (no gasket needed!) for all standard fireplaces and CHP
Reasonable alternative to classic DWFU system : double wall stainless steel chimney for all low pressure standard fireplaces. Works in both dry or moist conditions
The classical : double wall stainless steel chimney for all standard fireplaces working with low pressure
Double wall acid-resistant stainless steel chimney to connect fireplaces for fuel types : oil, gas, wood chips, split logs and wood pellets according to DIN 51731, for dry and moist usage
The allrounder: pressure tight double-wall stainless steel chimney with conical sealing connection
The Plus-X-Award winner: DW-VISION, the double wall stainless steel chimney, can be used without any clamping fittings which makes a smooth chimney column possible
Double-wall stainless steel chminey with acid-resistant ceramic inner pipe, ideal for solid fuel in a wet operation mode